11.25.2008

Springfield XDM review

Note: if you loathe weapons in any form, go ahead and pass on this post! In light of recent events at my neighbors house as well as the outcome of the presidential election, I decided it was time to purchase something for defense of my person, my home, and my friends/family as well as something that I can use while out on the ranch in case I encounter feral hogs, rattlesnakes, and other vermin. A good varmint rifle can cover these tasks with the exception of being easily portable. I though about getting a shotgun however being a southpaw when it comes to shooting makes this a bit more difficult due to the direction the spent shells will fly (towards my face). A lefty Benelli semi-auto 12-ga is also a bit out of my price range (right now!).

I had narrowed down the plethora of options to something in the .40 S&W caliber, semi-auto category. The big reason for a semi-auto was that to qualify for the concealed carry permit in the State of Texas, you cannot carry a semi-auto IF you tested on a revolver. I also envision getting a little revolver to carry as most semi-auto frames are too big to easily conceal. Another item to consider was that the semi-auto would come in quite handy working around the home place or when out rounding up cattle should we come upon varmints or snakes. After two weeks and several hours at the local gun shop, I finally had my choice. "Say hello to my little friend!"


You are looking at the Springfield Armory XDM. There were several reasons I chose this firearm over the plethora of other ones available. Those reasons include:
  • Fit, form and function. Out of the 8 options I had, this fit my hand the best. Being a southpaw, I needed something that could easily be used by my left hand. All the controls on this beauty meet that need.

  • Capacity. I never envision nor hope that I will ever be involved in a firefight. However, I can hold 16+1 rounds in this firearm. That might actually come in handy if we run across a herd of feral hogs. Also, the .40 S&W ammo was one of the more powerful rounds that was more common, with the .357 SIG being the only one more powerful.

  • Trigger. The XD and XDM series have a trigger safety similar to that of a Glock. Out of all those tested, this trigger felt the sharpest, had the best length of travel, and the best reset. It is nice and crisp which is good for accuracy but less important for other uses.

  • Match-grade barrel. Although this isn't a necessity, the barrel is designed for competition which theoretically means better accuracy. More on this in a moment.

  • Durability. The XDM is another polymer-based frame with steel slide. My research and reading shows that the finish should stand up for MANY rounds. Also, I saw a recent article that they ran 20,000 rounds through the XDM after being submerged in sand and water, frozen in ice, and run over with a truck. There were some minor issues with the sand (what firearm doesn't have that problem) but it never failed to fire. The only fail to fires were with sub-par ammunition.
I took my XDM with me when visiting family a couple of weeks ago and squeezed off several rounds on a target at 25 feet; the standard distance for sighting in a pistol and for competition practice. The best free hand (meaning standing/no bench rest) 5-shot group I had measured 1 inch in the horizontal and 1/2 inch in the vertical! Unfortunately it was 4 inches high due to poor sight picture on my part. This grouping was much better than any of those published (at least that I could find). All rounds fired easily would have been in the thoracic cavity of a full-body target.

The recoil is easily manageable by my standards although my arms were tired by the end of shooting. As a result, the groupings towards the end of practice were much worse than at the start. This is something I can work on with a bit of weight training and dry-fire practice. Disassembly for cleaning is a BREEZE compared to some of the other models I looked at. I also liked the consistency the firearm had with ejecting the spent cartridges which never were in any danger of impacting my face (another problem faced by some southpaw shooters).

My only very minor disappointment is that the XDM is built in Croatia and imported into the USA. I prefer to support the USA firearm companies (well, those that didn't cave to the Clinton Administrations Firearms...cough cough...Smith and Wesson). This is so minor that I wouldn't even bring this up when discussing with friends. The quality is outstanding, reliability looks good, the fit is perfect, and the fun factor is quite high. I like it!

Stay tuned as I squeeze off a few more rounds with my XDM, especially once I start hand loading some ammo to really hone the accuracy as much as possible...

11.21.2008

As Usual; Busy

Oh so much going on, so little time it seems. This is another one of those posts that basically is more of a list of all that is going on right now...
  • Had a great trip home for 6 days. I was originally going to stay for 5 days but decided to take an extra day off. The hunting was too good, there were plenty of things to do at home, and as the extra 5 pounds I put on this week indicates, mom's home cooking was mighty good as well.

  • Another item taken care of while home was discussing getting a new vehicle to replace my aging 1997 Ford Exploder Explorer. I bought the Ford used back in 2001 and it is starting to show the wear and tear of the 140,000 miles I have put on it since then. Most of those are road miles, but I'd estimate 5-7,000 miles of that are extreme, hard-driven miles it accumulated stormchasing. Right now it is at the point that any major repairs are probably going to cost about as much, if not more, than the vehicle is worth. Next in line: 2005-2007 Chevy/GMC 1/2 ton Crew Cab 4x4/Z71 short bed with 20-40,000 miles on it. Perhaps a Christmas present to myself if a family friend can find one for me...

  • The last part of the trip was spent taking pictures at sunset on my way home. I'm still proccessing the pictures in Photoshop (resize, copyright notice, sharpening, and removing CCD noise is it) and will hopefully have them on-line soon. These won't be in Picasa; I found out the license agreement for the newest version gives Google the perpetual (as in forrrrrrreeeeeeeeeevvvvvvvvvvvveeeeeeeeeerrrrr) use of ANY pictures I put on the web through their service. That stinks. I'll try and find a flash gallery soon and finally develop a personal web-space.

  • In news closer to the South Plains; I was informed they captured the burglar mentioned in an earlier post. The detective said he was passing the case off to the District Attorney so we'll see where things go from here.

  • Related to the previous bullet...I have a new weapon for home defense. Be looking for my impressions on my choice soon.

  • I'm prepping for a trip to Norman in December. My unnamed employer is holding a workshop to see where we want to try and take our severe weather warnings in the future. Right now, the format we use (and which you see as the scroll across the bottom of the screen during severe weather) is based on teletype technology from the 1950s. Needless to say, we are well behind the technology curve and need to catch up. Fast.

  • If you didn't notice, a couple of posts were removed. Things with a certain someone didn't work out. Most of y'all already knew that but I thought I'd inform the few that hadn't heard.
So, that's about all from around here. Pretty much the same old stuff. Just wishing it would rain...and lots of it over several days over all of Texas. It is starting to get dry once again.

11.13.2008

Dyslexia? Or something else???

Maybe this is why I have problems telling folks where I am when stormchasing or when I'm at work trying to get spotters on a storm (courtesy of XKCD.com):

(And another recent cartoon for your enjoyment).

11.07.2008

The Search Continues

Much to the disappointment of my friends and Dad, I am not a coffee drinker. I've tried and tried various types, blends, cappuccinos, and lattes. There was even one cold night we were on a men's retreat at Guadalupe Mountain, it was 25 degrees, and I was so cold I tried cowboy coffee with a packet of hot chocolate mix added in (you know, cowboy coffee as in grinds at the bottom of the pot, heated over an open fire, and it comes out so thick you could slice it with a knife?). It definitely warmed me up due to the caffeine content and the high likelihood I ingested some coffee grounds. How could I forget in a moment of distraction ordering a Pumpkin Spiced Latte from Starbucks (not realizing I ordered it full octane either) and taking a first sip and realizing it was coffee. Yup...I still don't like coffee.

Anyway, since I haven't been able to develop a taste for coffee I have had to find something that would meet the approval of my apparently narrow palate for the times I am out with friends at a coffee shop. Six years ago, I was introduced into the world of Chai. More specifically Masala Chai, which most Americans know as spiced chai. One chilly day at the Wesley Foundation, the director decided it was time to make Chai the old-school way; warm the milk on the stove and place the loose tea leaves and spices in the milk. I had never seen nor heard of anyone making tea with milk until that fateful afternoon, but I've been hooked ever since and have been struggling to find something that is easy for me to make at work with only a microwave.

At first there was Celesital Seasonings Indian Spiced Chai which is somewhat easy to make: steep like normal tea with water and add milk. However, there is something in their mix that I am allergic to and consumption every morning for five days leaves my throat raw and itchy. Next came a local coffee shop here in the Hub City; Sugar Browns. I don't know what they use but I absolutely LOVE their Chai. There is also Daybreak Coffee Roasters which has a good Chai (and the fact I had a roommate and good friend who worked there) but I'm not sure what the mix is they use. However, I had to leave this behind for 5 years when I was in the Top o' Texas and found the local establishment there: Roaster's. It turns out that they use Oregon Chai which is available in instant mix packets. Now, the instant mix is nowhere near as good as a fresh brewed cup but is MUCH more convenient for a work environment where a stove isn't available. This is also very convenient for camping and vacations; just throw in a couple of packets and I can warm up in the morning to my Chai while everyone else has their coffee. Two other reasons I favor Oregon Chai; they carry Vanilla Chai (my favorite) AND decaf (but not decaf vanilla, dang).

Well, now I'm back in the Hub City but live too far from Sugar Browns and Daybreak south to make the detour when I am heading into work. The closest place is Starbucks and they use Tazo Chai which is a decent balance between all the choices available. However, I hate supporting a chain when there are local shops. It also became very apparent when I first moved here and was on per-diem that purchasing chai over black coffee at various shops is relatively more expensive. With the economy in the tank right now, I also don't want to spend the $$ at Starbucks when I'm working day-shifts. SO, I'm limited to making it myself. Unfortunately, I have yet to find my instant Vanilla Oregon Chai for sale here in the Hub City. The nearest United Market Street does carry the mix where all you have to do is add milk but I hate microwaving milk. What I really need is a milk steamer.

Hence the title of this blog entry. I'm still in the search of a simple milk steamer. Yes, I could use a double boiler but that would get a bit tedious to clean every day and we don't have a cook top at my office. I've done the microwave thing the last couple of weeks but this is hit and miss; heat it too much and you start to curdle the milk, not enough heat and it comes out lukewarm and there is nothing worse than expecting a nice hot sip of your favorite tasty beverage only to get something that is barely above body temperature. For home, I'd like a simple stove top steamer; works like a tea kettle but allows you to pipe the steam into your milk to warm it. For work, something I could plug in, heat water with and then steam my milk. So far my search of the web via google has not yielded anything nor has my searches of various stores around town.

Anyone have any ideas???

11.04.2008

Scary Moment

I got home from work this morning and took care of some housekeeping items for a couple of hours. Driving up to the house, I noticed that my lawn was awash in brown leaves and decided to get them out of the way before the West Texas wind machine added another 3 inches of dead leaves tomorrow. So, I ventured out back sometime shortly after 10 am to get the rake and the trash can and went through the gate on the side of the house to head out front.

The first thing I notice is the screen on my neighbors house was lying on the ground in a twisted heap.

Second thing was the storm window was open.

Third thing was hand prints in the dust on the inner window.

Fourth thing was their gate was open.

O.K. those things aren't normal. As I walk around to the front of my house and start to rake leaves, a stranger walks across my neighbors lawn and starts heading down a cross street. Then a strange car parked across the way picks him up and then takes off down the road.

I'm scared $*@%less. After running in the house and dialing 911, two cops showed up and started to investigate matters.

Yup, my neighbors house was broken in to this morning. After the cops did their search and I gave them what little info I could give, the only thing they could figure out was either a door was left unlocked or a family member committed the crime. The scariest thing was that I apparently startled them in the middle of their attempt.

So now I am STILL scared $*@%less. Every little noise I hear, every shadow on the sunroof, every gust of wind freaks me out. The culprit or culprits probably got a good look at me but I didn't get a good look at them. No matter what I do, it feels as if the locks aren't good enough, the latches on the windows aren't strong enough, and the visibility around my house isn't good enough for my neighbors to keep watch on my house.

My neighbors were extremely grateful that I did call 911 and in talking with them they said nothing like this had happened in the 15 years they've lived in the neighborhood.

There is a first time for everything...